The TLM Series 5-Axis
Laser Cutting System

The TLM Series of 5-axis laser cutting systems simplifies the processing of 3-dimensional workpieces to perform any number of cutting tasks. Run programs from G code or an NTC-developed simplified coding process. A simple to use teach mode makes cutting path generation easy and takes the guesswork out of virtually all 3-dimensional cutting applications. Offline programming 5-axis software is available.

The TLM Series is comprised of models with work envelopes ranging in size from 51" x 51" to 110" x 169" with up to 787"/min speed feed rate.

Standard features include:

  • 3300W laser oscillator
  • 8 gB hard disk capacity
  • One point directional head
  • On line gap sensor
  • Patented nozzle design
  • CMM type teaching probe
  • 5-axis joy stick digitizing
  • 32-bit microprocessors
  • Cutting conditions library
  • "Superior Cut" high pressure gas assist system
  • Installation / training
  • Start-up parts kit

Optional features include:

  • Machine tool enclosure
  • Exhaust system
  • 359° C-axis rotation
  • 2.5" and 7.0" focal length lens
  • 48" Z-axis travel
  • Programmable power ramping
  • Auto power ramping
  • Pipe cutting software

Specifications TLM Series

  TLM-404 TLM-408 TLM-608 TLM-610 TLM-614 TLM-914
Table size 1300mm (51") x 1300mm (51") 1300mm (51") x 2500mm (98") 1900mm (75") x 2500mm (98") 1900mm (75") x 3100mm (122") 1900mm (75") x 4300mm (169") 2800mm (110") x 4300mm (169")
Table height 700mm (27.5") 700mm (27.5") 700mm (27.5") 700mm (27.5") 700mm (27.5") 730mm (28.8")
X-axis stroke
Table left/right travel
1300mm (51") 2500mm (98") 2500mm (98") 3100mm (122") 4300mm (169") 4300mm (169")
Y-axis stroke
Optical head front/back travel
1300mm (51") 1300mm (51") 1900mm (75") 1900mm (75") 1900mm (75") 2800mm (110")
Z-axis stroke
Optical head front/back travel
600mm (24") [from table top 100mm (3.9") - 700mm (27")] 600mm (24") [from table top 100mm (3.9") - 700mm (27")] 600mm (24") [from table top 100mm (3.9") - 700mm (27")] 800mm (31") [from table top 100mm (3.9") - 900mm (35")] 800mm (31") [from table top 100mm (3.9") - 900mm (35")] 800mm (31") [from table top 100mm (3.9") - 900mm (35")]
C-axis
Optical head
±200° ±200° ±200° ±200° ±200° ±200°
A-axis
Optical head
±180° ±180° ±180° ±180° ±180° ±180°
X, Y-axis
Rapid feed rate
40,000mm (1575")/min. 40,000mm (1575")/min. 40,000mm (1575")/min. 35,000mm (1378")/min. 30,000mm (1181")/min. 20,000mm (787")/min.
Z-axis
Rapid feed rate
30,000mm (1181")/min. 30,000mm (1181")/min. 30,000mm (1181")/min. 30,000mm (1181")/min. 30,000mm (1181")/min. 20,000mm (787")/min.
C, A-axis
Rapid feed rate
15mm 200° /sec. 15mm 200° /sec. 15mm 200° /sec. 15mm 200° /sec. 15mm 200° /sec. 15mm 200° /sec.
X, Y, Z-axis
Cutting feed rate
30mm (1.2") - 30,000 (1181")/min. 30mm (1.2") - 30,000 (1181")/min. 30mm (1.2") - 30,000 (1181")/min. 30mm (1.2") - 30,000 (1181")/min. 30mm (1.2") - 30,000 (1181")/min. 30mm (1.2") - 30,000 (1181")/min.
C, A-axis
Cutting feed rate
MAX 200°/sec. MAX 200°/sec. MAX 200°/sec. MAX 200°/sec. MAX 200°/sec. MAX 200°/sec.
Drive motor AC servo AC servo AC servo AC servo AC servo AC servo
Drive mechanism Ball screw Ball screw Ball screw Ball screw Ball screw Ball screw
Guide mechanism Linear ball guide Linear ball guide Linear ball guide Linear ball guide Linear ball guide Linear ball guide
Positioning accuracy ±0.03mm (0.001") /300mm (12") ±0.03mm (0.001") /300mm (12") ±0.03mm (0.001") /300mm (12") ±0.04mm (0.0016") /300mm (12") ±0.04mm (0.0016") /300mm (12") ±0.06mm (0.003") /300mm (12")
Floor space W x L 3650mm (144") x 6030mm (238") 3650mm (144") x 7220mm (285") 3650mm (144") x 7220mm (285") 4250mm (168") x 7820mm (308") 4250mm (168") x 9780mm (385") 6370mm (251") x 9750mm (384")
Machine weight 9000kg (19,845lb) 12,000kg (26,460lb) 14,000kg (30,870lb) 15,000kg (33,075lb) 17,000kg (37,485lb) 20,000kg (44,100lb)

NTC Laser - NTC America Corporation • 46605 Magellan Drive • Novi, MI 48377 • 800.NTC.LASR • Fax 248.560.0215 • www.ntclaser.com

 

 

Copyright 2013© NTC Laser - NTC America Corporation